Vibration is a part in every system that has moving components. From small systems to large-scale applications, movement can result in unintentional vibration. The reduction or elimination of the vibrations is a crucial factor for every manufacturer. This requires the correct selection of anti-vibration pad technology. It is important to realize that not every anti vibration technology is made equal. the best choice will provide substantial benefits, whereas an unwise choice could result in high levels of vibration that could cause premature failure, and lead to other issues.
An anti-vibration pad that is advanced is constructed from different kinds of materials, dependent on the use. Natural rubber is a great solution to a wide range of requirements however there are some negatives to this material. It is not suitable for applications in which temperatures exceed 150 degrees Fahrenheit. Neither is it the best choice when the pad is submerged in oil.
Neoprene is a different material that can be used to construct the pad. This type of material has a greater temperature of maximum operating than natural rubber and can withstand temperatures of up to 180°F. It will also withstand the corrosive effects caused by oil immersion. Of course, it is just one aspect in the overall equation. It is also important to choose the correct anti-vibration pad design heating pad manufacturer.
There are two kinds of loads that are possible on an anti-vibration pad – compression and shear. Compression loading occurs when the load’s weight press directly onto the pad. Shear loading happens when the weight of the load presses onto the pad horizontally as well as at an angle. It is important to consider the durometer used by the materials in making an anti-vibration pad is a crucial factor to take into consideration. Durometer is basically a measurement of the hardness of the material.
Naturally, the pad’s dimension, shape, and existence of ribbing must be determined by the application you are using and the need for custom design is a crucial factor to consider in this. Utilizing pads that are not the right dimensions, shape or durometer could increase the frequency of vibrations within a system or trigger other issues that can cause system fatigue and eventual failure within a short amount of period of.
To reduce the impact of the effects of vibration on your system, it’s strongly recommended to partner with a manufacturer who can supply the anti-vibration pads that are made from the right material to meet the requirements of your application, and pads that are designed to stand up to the type of load, the temperature and other requirements of your application. Technology for anti-vibration pads and its construction isn’t an “one size fits all” scenario it is a case where custom designed pads might be needed.
The right manufacturer for your anti-vibration pad isn’t easy. Many manufacturers offer a variety of types of rubber mats and grommets bumpers and mounts that isolate and minimize the vibrations. But, not all companies are made to be the same. Collaboration with a leading innovator in the industry can be extremely beneficial and ensure the most durable vibration reduction system to meet your requirements.