Presentation
As far as I might be concerned, NZXT’s arrangement of cases is fairly commonplace for most case makers with a few product offerings with various qualities and cost levels. Two or three months back I investigated the NZXT Beta which is a case from one of NZXT’s lower valued series. The case which I will survey today, the NZXT M59 is essential for their “Exemplary” series which is a move forward from the lower spending plan models.
The NZXT M59 Mod Lighting Review is a medium reach case which is situated towards PC developers keen on modding. Here are the details:
NZXT M59 (Exemplary Series)
Size Medium pinnacle
Aspects 449 x 190 x 508 mm
Weight 6.5kg
Materials Steel SECC
Viable motherboards ATX, Miniature ATX
Extension sounds 4 x 5.25″ outside
7 x 3.5″ interior
Upholds 2 units of 2.5″ with the gave connector
Development spaces 7
Greatest size for cards PCI 10″ (260mm)
Outer ports 2 USB 2.0
eSATA
Amplifier
3.5mm (Sound AC97 and HD)
Cooling framework Front: 120mm fan (excluded)
Side 120mm Drove fan, 1200rpm, 23dbA, 42CFM
Back: 120mm fan, 1200rpm, 23dbA, 42CFM
Top: 2 120mm or 140mm fans (excluded)
Additional items Pins for fluid cooling, wiring the executives framework, enlightenment of the 5.25″ narrows, inside painting.
As you can see from the details you get a ton of pleasant elements with this case despite the fact that it is just a medium reach case. I’m particularly captivated by the cooling framework which can be truly broad on the off chance that you introduce fans at every one of the potential spots.
Initial feelings
NZXT utilizes the expression “Cool Clean Dark” on the card board confine which the M59 case comes in. I’m ready to concur.
The included embellishments are: a printed manual; jetties for the 3.5 units and every one of the screws of various kinds.
NZXT M59 Exhaustively, THE OUTSIDE
Assuming that I needed to pick two things worth focusing on about the plan of the NZXT M59, then, at that point, I would pick the front and the side window. These two qualities truly characterize the case and make it stand apart from the group.
The front of the M59 is for the most part made of plastic. NXZT has set the power buttons and the front connectors in the center calculated somewhat upwards. Over the connectors there are some 5.25″ development bayous and underneath the connectors there is a metallic framework behind which a 120mm fan is put as a matter of course.
The front development inlets are enlightened by a Drove light at the highest point of the case.
The left side is outfitted with a window of rather large aspects which truly flaunts within the case. NZXT has likewise added a 120mm Driven fan which is situated on about similar level where the designs card will be set.
As you can see from the shot of the rear of the case, the PSU is put at the lower part of it. At the extremely top you can see the two pre bored openings for establishment of fluid cooling. Straightforwardly underneath those two openings there’s a 120mm fan. The posterior is covered with a metal matrix in many spots to work with the cooling of the case.
In the roof of the M59, NXZT has made it conceivable to mount two 120mm or 140mm fans. As I said over, the power supply goes in the lower part of the case. As you can see from the picture beneath, there’s a metallic network expected to fill in as the air consumption for the PSU. This air admission is safeguarded by a residue channel which is a decent detail.
The elastic feet of the M59 give the case a greater height over the floor than what I’m utilized to see with different cases. I surmise the aim with the higher feet is to work with for the PSU to attract outside air from the floor.
NZXT M59 Exhaustively, the Inside
I took of the two sides to examine within the case. Aside from the window and the fan on the passed on side there’s not a lot to discuss.
Something to be thankful for about the included case fans is that they have a few distinct kinds of connectors which work with the wiring and the organization of the fans.
I truly appreciate that the inside of the case is painted in dark since it will make the framework look cooler through the side window once it’s running. One more detail which I appreciated from the outset was that the motherboard back plate is very carefully conceived with hollows for the link the board and one more empty for where the computer chip will be put which makes it simpler assuming you at any point need to eliminate the central processor cooler.
I wouldn’t agree that that the case is little inside yet the maximum designs card length it can uphold is 290mm, and that implies that Radeon 5970 won’t fit.
You can fit in a sum of seven 3.5″ units in the front coves which isn’t terrible in any way. I like that NZXT has turned the narrows 90 degrees which makes it simpler to work with the drives (5 units fit in this drive cove). NXZT has incorporated a 2.5″ connector which might prove to be useful to construct a framework with a SSD startup drive.
The NZXT M59 has four 5.25″ straights of which 3 are furnished with hostile to tidy channels. The forward is covered by a dark plate which is planned to be secured on the drive front. This implies that you can utilize a drive of any tone and it will in any case look great.
There’s a considerable amount of wiring coming from the front connectors and the power and reset buttons, we’ll see later in the event that it causes an issue.